Aluminum Honeycomb Panel

Product name: Aluminum honeycomb panel

Bottom plate thickness: 0.6 – 1.0mm

Panel thickness: 0.8 – 1.5mm

Total thickness: 25mm

Composition: Alloy aluminum

Grade: 3003, 5052



Monthly productio50000-100000 m2
Delivery timeStock:7 days
Futures:15-35 days
MOQ(Minimum order quantity)200 m2
Export marketEurope
Southeast Asia
Middle East, Latin America, etc

Product introduction

Aluminum honeycomb panel structure

The aluminum honeycomb panel adopts hot press forming technology. Due to the high thermal conductivity between the aluminum skin and the honeycomb, the thermal expansion and contraction of the internal and external aluminum skins are synchronized; the honeycomb aluminum skin has small holes to allow the gas in the panel to flow freely; the sliding installation buckle The system will not cause structural deformation during thermal expansion and contraction; therefore, it can ensure extremely high flatness.

Product advantages

1.Fire prevention: Aluminum plate is non-combustible material.
2.Corrosion resistance: The aluminum honeycomb panel is treated with epoxy fluorocarbon on the surface and has strong corrosion resistance. There is no pinhole, crack and no blistering after 48 hours of salt spray.
3.Environmental protection: The honeycomb panel is a pure aluminum product. It does not evaporate any harmful gases to the human body. It is non-radioactive and can be fully recycled. It is a 100% environmentally friendly product.
4.It is easy to disassemble and assemble, and will not dismantle the plate: Due to its light weight and convenient transportation, it can be transported to different places and reused many times.


(1) Building curtain wall
(2) Interior decoration
(3) Billboard
(4) Construction on board
(5) Aviation manufacturing industry
(6) Indoor partition and commodity display stand
(7) Commercial transport vehicles and container truck bodies
(8) Bus, train, subway and rail transit vehicles
(9) The modern furniture industry